TFR-1 Long Range Locator Rod Product Review

People have been talking about the “TFR-1 Long Range Locator Rod” (some categorized it as a metal detector) which often ended into a never ending debate if it’s really effectively working or not. 

This tool based on my own personal perspective works like a dowsing rod. 

You hold it with your hand and sweep it around then follow the direction of the rod’s tip until it takes you to spot where the item is buried.

Now, let’s look further into the product features of TFR-1 Long Range Locator Rod.

“Crystal and Mineral Powered”

Upon knowing that TFR-1 is powered by a natural element which are crystals and minerals, I already knew that it doesn’t require electrical energy which is the main advantage of dowsing rod detectors against EMDs (Electronic Metal Detectors). 

Although, it is still a puzzle to me the use of crystal and mineral as a power source for this tool.

“No Junk Metals or Magnetic Signal Guaranteed”

I like the word “guaranteed” which means, it delivers what is stated a hundred percent to the buyer. 

So by purchasing TFR-1 Long Range Locator, it guarantees that you won’t be detecting hassle scraps or junk of worthless pieces of metals. 

The magnetic signal being referred here is more commonly interpreted by others as noise or interference. It actually interferes with the frequency level of the tool which give annoying false signals. 

Gladly, TFR-1 Long Range Locator is capable of neglecting such unwanted signals giving only satisfying result to the user.

“Lightweight and Compact, Will Not Tire your Wrist”

Another obvious advantage of Long Range Locating detectors over the EMDs is the size. 

TFR-1 is so lightweight and compact that you can hold and use it for the entire day without tiring your wrist. Since this tool is held by just one hand, you can alternately operate it with any of your hands. 

So if it happens that you are right-handed and it came to the point that it got tired, you can just switched it to your left hand.

“Completely Collapsible for Pocket Transport”

Aside from being a lightweight device, TFR-1 Long Range Locator is also collapsible which can be easily disassembled that it can even fit inside your pocket.

“TFR-T.D. Target Discriminator Accessory”

What really makes TRF-1 a lot more interesting as compared to any other Long Range Locators in the market is its TFR-T.D. 

Target Discriminator Accessory. What it does is that, it allows you to determine the size of your target before you even attempt to dig it under the ground.

How TFR-1 Target Discriminator Accessory Works?


The Target Discriminator Box of the TFR-1 consist of a large dial in the middle. Around this dial is a scale of weight settings starting from the minimum, grams, ounce, pounds and maximum (1 gram to over 100 lbs.). 

 Take note, you have to set the dial into the corresponding weight of the item that you are trying to locate. It is very important that you really have to set the dial into the specific weight of the item that you intend to detect. 

Otherwise, you won’t be getting any signal from the rod it’s because according to the manufacturer, setting the target’s weight “precisely” gives accurate result.

After setting the dial up, you need the “material or sample”. This material must be the same type of material that you are trying to detect. 

So if you are searching for gold, you need a material which is also a gold. The minimum weight of the material must not be less than 1 gram but according to some users, 2 grams gives a much better result.

The discriminator box consist of a blue colored cap on its top. Opening it will reveal an empty chamber in which you need to put the sample inside it. 

The manufacturer don’t have any further explanation about the purpose of placing the sample inside the chamber of the box. 

But in my own opinion, the discriminator box uses the frequency pattern of the sample to detect similar type of materials via the locating rods.

TFR-1 Long Range Locator comes with a stereo cable which connects the discriminator box to the locator. 

At the bottom of the discriminator, there is a jack in which you are going to insert the stereo cable. The other end of the stereo cable it to be connected into the jack found at the bottom part of the TFR-1 handle.

Those are all the setup and you are good to go.

Amplification Booster of the TFR-1 Long Range Locator


The TFR-1 Long Range Locator already comes with the standard amplification booster which is the cylindrical piece connected at the opposite side of the locating rod or antenna. 

This part is actually removable which can be replaced with a better or more improved versions of amplification booster.

According to the manufacturer, the amplification booster works as a balancer which gives the rod more power. 

Inside the booster are secret ingredients discovered by the manufacturer in their several years of experimental tests especially on the field. 

One of the latest model is the TFR- A.B. (Stainless) Extreme Power Amplification Booster accessory. When used, it amplifies TFR-1’s range of detection from 500 to 700 feet distance range which is very incredible. 

Aside from its range, this booster model is also capable of detecting various types of material (not just gold) such as diamond, paper money, copper, aluminum or almost anything that you can fit inside the sample chamber. 

But, if you want to focus more in finding gold and silver then you should choose the TFR-A.B. (Brass) Gold Silver Amplification Booster. 

This model is perfect for prospectors looking for small amount of fine gold or nuggets. Its range of detection goes between 500 to 800 feet distance.

My Personal Review about TFR-1 Long Range Locator


In my own personal point of view, TFR-1 is a technological invention that evolved from the traditional long range locators which is the dowsing L-Rods. 

The main difference is that, traditional L-Rods requires two antennas which are held by both hands while TFR-1 consist of only one.

When operating the TFR-1 Long Range Locator, you need to swing it from side-to-side and feel through the rod the direction of the target. 

The feeling is like, there is a magnet pulling the rod into your target’s location. You have to keep swinging the rod while observing the strength of the pull because the stronger the pull, it means that you are getting closer.

Unfortunately, there are some individuals who have trouble trying to feel the pull or not getting any signal no matter how many times they tried. 

On my part, I could feel the pull but the real challenge is that, it is really hard to locate the exact spot of the buried item. 

Or, it could only mean that there are several deposits scattered around the area that I am trying to detect.

And finally, according to the manufacturer, TFR-1 Long Range Locator is capable of detecting 500 to 700 feet range distance. 

I want to emphasize the word “range distance” here which is not the same as “range of depth”. I assume it could penetrate almost an equal range of depth to its range of distance.

My overall product review of TFR-1 Long Range Locator is that, it is an awesome and powerful tool when used by the right person especially individuals who already have experiences in using dowsing tools.

1 comment:

  1. I Have one of these and I am a dowser also It has many advantages over Dowsing . The new attachment called Ghost eliminator . does what is says it does eliminates Ghost signals
    The bane of every dowser. Also Ignores Frequency rings so saying it works like dowsing rods not very accurate because it eliminates all the false signal Dowsing rods Give you ..This Is the first tool I grab when approaching a treasure site or nugget area . I Have close to 25000 dollars worth of treasure finding equipment so that says allot

    ReplyDelete